Capture One Pro 8.2 ReleasedThis is a feature release providing new features including dynamic output locations and a new color balance tool, bug fixes, stability improvements, and additional camera and lens support.

We are currently testing this release; we do not recommend upgrading into a critical workflow until our testing with this release is complete.


Update:

    • New Recipes Folder

      New Recipes Folder

    After upgrading, you may notice that your recipes are missing! Don’t worry, they’re still there! With the new dynamic locations feature, Capture One Pro creates a new Recipes82 folder in your Application Support / Capture One folder. So far, we have not experienced any issues after simply copying the old recipes into the new recipes folder and reopening Capture One. We’ll keep you posted if something changes.


Read on for more details about the update, or visit our Download Archive to get it.

8.2 Update Features

New Features & Improvements:

  • New 3-way Color Balance Tool for color grading
  • Dynamic Locations for optimized workflow
  • Resizable Curve and Color Balance tools
  • General under-the-hood improvements for tethering
  • Improved graphics in Library tool
  • New 5-point Curve preset for ease-of-use

Bug fixes

  • Several stability improvements
  • Fixed a number of alignment bugs
  • Fixed a number of localization bugs
  • Improved mask drawing (Mac)
  • Fixed an issue where the application would crash if external hard drive was disconnected
  • Fixed an issue where slideshows would show very slowly
  • Fixed an issue where integration with Media Pro was broken
  • Fixed an issue where Folders Hierarchy in the Library tool would not show
  • Fixed an issue where Masks would not be saved to EIP files

Camera support

  • File and tether support for Nikon D5500
  • Tether support for Nikon D750
  • File support for Olympus OM-D E-M5 II
  • File support for Fujifilm X-A2
  • File support for Panasonic GF7
  • File support for Sony NEX- VG900E
  • Improved color for Canon EOS 7D mk II
  • Removed tethered support for Nikon D200

Lens support

  • Zeiss Distagon T* 3.5/18mm ZF.2
  • Zeiss Distagon T* 2.8/21mm ZF.2
  • Zeiss Distagon T* 2.8/15mm ZF.2
  • Zeiss Distagon T* 2/28mm ZF.2
  • Zeiss Distagon T* 3.5/18mm ZF.2
  • Zeiss Distagon T* 3.5/18mm ZF.2
  • Zeiss Distagon T* 2.8/25mm ZF.2
  • Zeiss Distagon T* 2/25mm ZF.2
  • Zeiss Distagon T* 2.8/25mm ZF.2
  • Nikon COOLPIX P340
  • Nikon AF-S DX Zoom-NIKKOR 18-70mm f/3.5-4.5G IF-ED
  • Sigma 8-16mm F4.5-5.6 DC HSM (Canon EF)

Recommendations and limitations

All users

  • When you have disconnected a camera do not reconnect a camera until the Camera tool status changes to “No Camera Attached”.
  • DNG support is for raw DNG only is not optimized for specific cameras. Other camera users

Other Camera Users

  • Connecting some Canon cameras to the computer after launching Capture One might result in tethered capture being unavailable. If you experience this, connect the camera to the computer prior to launching Capture One.
  • This functionality is not supported for Fujifilm RAW files: processing/exporting to DNG, auto mask, healing with Repair Layers and LCC.
  • This functionality is not supported for sRAW/mRAW files: LCC analysis and healing with Repair Layers.
  • Canon Live View: The image is not rotated according to camera orientation, as Canon does not report the orientation during Live View.
  • Olympus OM-D E-M5 II “High Resolution” mode is not supported.

Digital Back users

  • Battery charging on IQ systems can cause issues with stability over Thunderbolt adapters or in low power devices such as Laptops. Switch charging off if you suffer repeated disconnections.
  • For tethered shooting with Phase One digital backs make sure that your system can either supply at least 10W power via Firewire (more than most laptops can supply) or make sure to activate the “Force Battery” setting on the back. Use the 4.5m Phase One Firewire cable.
  • For tethered shooting with Leaf and Mamiya DM digital backs make sure that your system can supply at least 12W power via Firewire (more than most laptops can supply). Use a Leaf or Mamiya Firewire cable.
  • Unless otherwise specified for your Phase One camera system, do not open the shutter on the camera prior to opening the Live View window. Doing so will generate errors on the digital back after closing the Live View window. The recommended procedure for using Live View is to first open the Live View window, then open the shutter on the camera, use Live View as desired, when done, close the shutter on the camera, and close the Live View window.
  • For Leaf Backs and Mamiya DM systems, the camera body must be selected in preferences before connecting the back.
  • For Leaf Backs and Mamiya DM systems, in the case of a communication error during firmware upload, please wait 10 minutes before disconnecting the FireWire cable.
  • Leaf Aptus II 8 only works with black and white Live View.
  • Focus controls for iXR and iXA cameras are only supported by IQ and Credo backs.

You can find the release notes here: Capture One 8.2 Release Notes

%d bloggers like this: