Phase One IQ4-150 Achromatic – High ISO or Push Process

 In News, Phase One Achromatic, Phase One Tip, Tech, XF IQ4 Blog Series
Guadalupe, Baja California, Mexico - Phase One IQ3-100 Achromatic / Phase One XF / Schneider Kreuznach 35mm / ISO 800
Guadalupe, Baja California, Mexico – Phase One IQ3-100 Achromatic / Phase One XF / Schneider Kreuznach 35mm / ISO 800

We often field questions on best ISO use and cameras from various manufacturers have varying abilities to extend beyond their base exposure settings. While the more aged Phase One digital backs that held CCD sensor technology could run to 400 & 800 ISO’s, the resulting look would be much like high-speed color negative film, with poppy bright spots and a clear ‘grain’ pattern.

The CMOS sensor technology that has been the primary flagship sensor technology for Phase One for the last decade or so reaches higher ISO’s with more ease and latitude than the CCD backs, but with a different set of artifacts like all digital cameras inevitably do when you overdrive the sensors.

Let’s get this out at the very beginning, this is an exercise in pixel peeping as viewing the comparative quality of these files, even when viewed at 100%, can be somewhat difficult. Admittedly, even worse when trying to convey this information with anything less than the full 16-bit raw files in a darkened viewing environment on a good monitor.

The purpose of this endeavor was to find the limitations of preserving shutter speed while not giving up an operational depth of field within a demanding naturally lit underwater environment that our client Riccardo Ullio was shooting within, upon his upgrade from IQ3-100 Achromatic to IQ4-150 Achromatic.

I sought to determine what changes of quality would be met when combining the overdriving of the sensor through ISO expansion in comparison and in combination with the power Capture One’s exposure compensation abilities utilizing the Phase One 16-bit raw file to Push underexposed captures so that maximum reproduction sizes could still be maintained.

All of the test images here if clicked, will expand into a full screen version that represents the screen captures from my EIZO monitor. The images are keyed with Color Tags for the ISO they were shot with as well as Star-Ratings representing the amount of software push was utilized to maintain the same overall exposure in the purposefully underexposed shots.

Initially the results were somewhat surprising until I integrated what I already knew and understood about Phase One 16-bit captures with these test results.

Brad Kaye – Technical Services Manager, Capture Integration

The Camera:

Phase One XF IQ4-150 Achromatic with Schneider Kreuznach 35mm LS Lens
Phase One XF IQ4-150 Achromatic with Schneider Kreuznach 35mm LS Lens

The Scene:

iq4-150-achro-iso_test-scene
My cluttered garage surfaces when both my crash-cart and my bench were considerably out of sorts, but still much drier than underwater as a testing environment.

The Exposure Matrix as shot:

5-star= No Push, 4-Star=+1 Push, 3-Star=+2 Push, 2-Star=+3 Push, 1-Star=+4 Push

ISO 200=Green, 400=Blue, 800=Pink, 1600=Purple, 3200=Yellow, 6400=Orange, 12,800=Red, 25,600=Grey

iq4-150-achro-iso_full-test-bracket-matrix-full
ISO 200=Green, 400=Blue, 800=Pink, 1600=Purple, 3200=Yellow, 6400=Orange, 12,800=Red, 25,600= Grey

100% Crop @ each available Full Stop ISO increment

(I found myself staring at the wood grain a lot while reviewing these files)

  • iq4-150-achro-iso_iso-25600.jpg
  • iq4-150-achro-iso_iso-25600.jpg
  • iq4-150-achro-iso_iso-25600.jpg
  • iq4-150-achro-iso_iso-25600.jpg
  • iq4-150-achro-iso_iso-25600.jpg
  • iq4-150-achro-iso_iso-25600.jpg
  • iq4-150-achro-iso_iso-25600.jpg
  • iq4-150-achro-iso_iso-25600.jpg

We will primarily be addressing the top ISO 200 – ISO 3200 portion of this matrix that has the most relevancy within this specific test.

(shown as actually exposed from camera without software exposure push from Capture One)

iq4-150-achro-iso_full-test-bracket-matrix-partial
ISO 200=Green, 400=Blue, 800=Pink, 1600=Purple, 3200=Yellow

Here’s what a 400% pixel peep looks like with a normal exposure across the ISO range:

iq4-150-achro-iso_pixel-peeping-iso-range
Raising ISO 2 stops to 800 has little to no consequence on detail rendering

Here’s the comparison matrix that will follow in the images below… Reference Frame @ ISO 200, compared to Base Exposure for ISO 3200 with camera underexposing and pushes to the ISO’s falling back to 200 to maintain the same exposure:

iq4-150-achro-iso_bracket-logic_thumbnails
iq4-150-achro-iso_bracket-logic_actual-scaled
ISO 200 Base Exposure / ISO 200 +4 / ISO 400 +3 / ISO 800 +2 / ISO 1600 +1 / ISO 3200

Here’s what I see from these files.. (have a look and compare with me)

iq4-150-achro-iso_push_2_winner
ISO 200 Base Exposure / ISO 200 +4 / ISO 400 +3 / ISO 800 +2 / ISO 1600 +1 / ISO 3200
iq4-150-achro-iso_12800vs3200push2
ISO 3200+2 vs ISO12,800
iq4-150-achro-iso_800-2stoppush2
ISO 800+2 vs ISO 3200
iq4-150-achro-iso_800-2stoppush1
ISO 800+2 vs ISO 3200

Really difficult to come up with a clear-cut, definitive statement, but my quick conclusion (after staring at images for literally days as I bounced in and out of writing this) is I would have no problem running an ISO of 800 with a 2-stop underexposure if I needed to achieve ISO 3200 sort of shutter speeds and there’s certainly the math for even 3-stop and 4-stop pushes given the incredible amount of tonal bandwidth available in Phase One raw files. That’s the magic here… the fidelity of the 16-Bit capture here is phenomenal and the raw IIQ 16-Bit Extended format file really shines. I tend to like how the wood grain in these shots render with the ISO 800 +2 shots compared to the ISO 3200 shots even when applying 75% shadow recovery which is another additional Push.

I will likely repeat this test with the color unit at a future date, as the dance of color enabled pixels may change the dynamic. -bk

caymen_uw_bw_120mm_cf001293 Phase One IQ3-100 Achromatic / Phase One XF / Schneider Kreuznach 120mm / ISO 800 / f4.5 - 1/250th
Phase One IQ3-100 Achromatic / Phase One XF / Schneider Kreuznach 120mm / ISO 800 / f4.5 – 1/250th

For More Resources

from Brad Kaye and the Medium Format Experts

Brad Kaye - Capture Integration Technical Service Manager

Follow Us, & Subscribe to Our Newsletter Mailing List!


Recent Posts